Aico Ei205EN Carbon Monoxide Alarm
Ei205EN
Battery Powered CO Alarm With Memory
In those instances where the budget will not cover the cost of installing mains powered Carbon Monoxide alarms, the alternative is to install a good quality battery powered alarm.
The 205EN Series alarms use a proven electrochemical cell type sensor which checks CO concentration every 50 seconds. All units are individually calibrated and tested in CO gas in order to ensure accuracy and they’re covered by a lifetime – 5 year guarantee.
As well as being easy to install and maintain, the alarms have a vitally important memory feature which records if CO has been detected whilst the occupier was away. Activated by pressing the test button, 1 flash of the red LED every 2 seconds indicates 150ppm, 2 flashes per second 350ppm.
An easy to use Test/Hush button allows the user to check that the horn and electronics are working to silence nuisance alarms. Additionally, if testing with CO gas is required pressing the test button activates the “Quick CO gas test” feature which reduces the waiting time for testing with CO to approximately 20 seconds. On a large scale testing programme this represents a considerable time and cost saving.
Main Features
Easy to install
Electrochemical Cell CO Sensor
Calibrated and tested in CO
Long life AA Alkaline batteries
Test/Hush button
Comprehensive indicator lights
Low and High Level Alarm Indicator
Distinctive alarm sound
Automatic self checking circuit
Memory
Quick CO Gas Test
Battery locking device
Neat slimline design
Suitable for both ceiling and wall mounting
No maintenance
5 Year Guarantee – includes batteries
Trouble Shooting
Alarm does not work with the Test Button:
Hold button down firmly for at least 5 seconds
Check the batteries are correctly connected
Replace batteries
Alarm beeps every minute:
If the alarm beeps every minute and the green light flashes at the same time, then the batteries are depleted and must be replaced
If the alarm beeps every minute and the amber light flashes at the same time, then the unit is probably defective. Disconnect batteries for 1 minute and re-connect. If problem persists, replace the unit
Alarm sounds for no apparent reason:
Ensure there are no fuel-burning appliances in the vicinity which could be leaking CO gas(e.g. even from next door)
Ensure there are no fumes in the area (e.g. paint, thinners, hair spray, chemical cleaners, aerosol sprays etc)
Ensure there is no outdoor source of CO in the vicinity (e.g. a car with engine running, heavy traffic, heavy air pollution, barbecue fumes etc)
Press the Test/Hush button to silence the alarm
If the unit continues to sound it is possibly defective and should be replaced. Please refer to the use and care manual for instructions
All Lights Flash:
On power up the green, red and amber lights turn on in sequence to show they are working. This is normal
.jpg "Click image for larger view")
